Fluo-200 Fluorometer, Single Sample, Touch Screen
For low-concentration DNA, RNA or protein samples, a fluorometer gives you much higher sensitivity than absorbance. The Fluo-200 reads one 0.5 mL tube in about 5 seconds, with a dsDNA detection limit below 0.1 pg/µL. Sold in Canada by Luna Nanotech of Markham, Ontario, with prices in Canadian dollars. Contact us with questions or for a quote.
The Fluo-200 is a benchtop fluorometer for highly sensitive quantification of DNA, RNA and protein. Place a 0.5 mL tube in the chamber, and the 7-inch touch screen gives you a result in about 5 seconds, with a detection limit that reaches below 0.1 pg/µL for dsDNA.
- Dual-channel detection: blue and red excitation channels support a wide range of fluorescent dyes.
- Open reagent use: works with assay reagents from different manufacturers.
- Small sample volume: accurate results from only 1-20 µL of sample.
- Results storage and export: saves sample data as CSV or PDF, exports to a USB drive, or prints to an external printer.
- Compact: 1.5 kg and about 161 x 286 x 61 mm.
Catalogue number AS-18050-00.
Technical Specifications
- Model: Fluo-200 (catalogue no. AS-18050-00, blue and red channels)
- Light source: LED
- Excitation filters: blue 470 ± 15 nm; red 625 ± 20 nm
- Emission filters: green 525-570 nm; red 670-725 nm
- Detector: photodiodes, 320-1100 nm
- Throughput: 1 sample
- Sample tube: 0.5 mL PCR tube
- Linearity: R² ≥ 0.995 over 5 orders of magnitude
- Sensitivity: below 0.1 pg/µL (dsDNA HS)
- Measurement time: 5 s per sample or less
- Display: 7-inch touch screen
- Ports: USB Type A x2, USB Type B x1, LAN x1
- Power: 24 V DC, 2 A; 100-240 V, 50-60 Hz
- Dimensions (W x D x H): 161 x 286 x 61 mm
- Weight: 1.5 kg
Frequently Asked Questions
Which dyes and assay kits does the Fluo-200 work with?
It has two channels. The blue channel excites at 470 ± 15 nm and reads green emission at 525-570 nm. The red channel excites at 625 ± 20 nm and reads at 670-725 nm. It accepts assay reagents from different manufacturers.
How much sample is needed?
1-20 µL of sample in a 0.5 mL PCR tube.
How sensitive is it?
Below 0.1 pg/µL for dsDNA HS, with linearity of R² ≥ 0.995 over five orders of magnitude.
How do I save or export results?
Results save as CSV or PDF. You can export them to a USB drive or print to an external printer.














